Multi-Bore 85A
Multi-Bore tubing is produced using our Fre-Thane® polyurethane in a single extrusion. Unlike MCR, it is made in one extrusion which means the tube can only be made in a single color. Unlike MCR, Multi-Bore can't be separated cleanly and should not be used with push-in fittings.
Due to special manufacturing conditions, we are able to offer Multi-Bore only in the colors listed below. If you require more colors, consider using our Multi-Color Ribbon (MCR). See page 20 for more information about MCR. Freelin-Wade_MultiBore.pdf
| O.D. (Outside Diameter) |
I.D. (Inside Diameter) |
Options |
| .250 or 1/4 or 6.4 mm |
.125 or 1/8 or 3.2 mm |
|
| .250 or 1/4 or 6.4 mm |
.125 or 1/8 or 3.2 mm |
|
| .250 or 1/4 or 6.4 mm |
.125 or 1/8 or 3.2 mm |
|
| .125 or 1/8 or 3.2 mm |
.066 or 1.7 mm |
|
| .250 or 1/4 or 6.4 mm |
.125 or 1/8 or 3.2 mm |
|
| .125 or 1/8 or 3.2 mm |
.066 or 1.7 mm |
|
| .250 or 1/4 or 6.4 mm |
.125 or 1/8 or 3.2 mm |
|
| .125 or 1/8 or 3.2 mm |
.066 or 1.7 mm |
|
| .250 or 1/4 or 6.4 mm |
.125 or 1/8 or 3.2 mm |
|
| .125 or 1/8 or 3.2 mm |
.066 or 1.7 mm |
|
| Displaying 1 to 10 (of 10 products) |
Result Pages: 1 |
|
